Advantages of Stainless-Steel Cable Rail Fittings

Advantages of Stainless-Steel Cable Rail Fittings

Stainless-steel cable rail fittings are the way to go when looking at deck materials. Not only are they durable and sustainable, but they have great usability. For a glance at these advantages of stainless-steel cable rail fittings, continue reading the content below. After reading this, it will be clear that these specific stainless-steel cable rail fittings are what you need.

Read More

Wire Rope Versus Chain: the Differences

Wire Rope Versus Chain: the Differences

Whether you’re in the construction, automotive, or food and beverage industry, there’s a very high chance that heavy lifting will be required at some point. Specifically, there are two different ways to hoist heavy loads, the first one being chain ropes and the second being wire rope. To better understand wire rope vs. chain: the differences between the two, continue reading the material provided below.

Read More

Wire Rope Inspection Checklist

Wire Rope Inspection Checklist

In the rigging businesses, there are ample protocols and procedures for cable rigging hardware that are designed to ensure safety. One protocol that is crucial to follow is the inspection of wire ropes. Below, we have provided information on who should inspect the wire ropes, how to inspect them, and when to stop using them. Continue reading for our wire rope inspection checklist.

Read More

How To Calculate Sling Angles

How To Calculate Sling Angles

Rigging is complex, and that is one of the many reasons that you should not take on a rigging task unless you are a professional. In order to take on this task, there are several elements that you must understand, including how to calculate the sling angles. It’s unlikely that you could complete a rigging project without first considering the sling angle, as this measurement will help you identify what sling you will need to use for the project or task at hand. For an in-depth look at how to calculate sling angles, continue reading the material provided below.

Read More

construction site

The Different Types of Rigging Hardware

Whether you’ve installed a rigging system before or not, there are several pieces of hardware you’ll need aside from the cabling itself. Continue reading to learn about the different types of rigging hardware.

Cable clamps

Sometimes referred to as clips, a cable clamp is an industrial-grade galvanized metal that holds the cables throughout the rigging system. In most setups, you’re going to need at least two of these. The most common use for cable clamps is to hold the cable together to reinforce the cable and reduce the load.

Eye bolts and hooks

The main use of eye bolts is to attach them as a point of securing the cable. There are several factors that go into choosing an eye bolt, but the most notable factor is its weight capacity. There are three common variations of eye bolts: standard nut eye bolt, shoulder nut eye bolt, and stainless shoulder nut eye bolt. All of these have their own weight capacities and applications. An eye hook is the industrial-grade hook that you’ll attach to loads. As a safety and security measure, all quality eye hooks will come with a latch mechanism on the hook as well.

Shackles

As one of the most-used rigging hardware factors, quality shackles are vital to a successful rigging setup. One way to identify quality shackles from economical shackles is if they’re forged or not. All our rigging shackles are forged to ensure the highest strength. Plus, to help you not forget the shackle’s weight capacity, all of ours have the capacity permanently embossed on the hardware.

Forged swivels

To help position your load with the most control, you’ll want reliable swivels. We offer three types of swivels: eye and eye, jaw and eye, and chain. To ensure strength and durability, all of our swivels are also forged, just like our shackles.

Slider choking hooks

Similar to eye hooks, choking hooks help you lift bundles or materials that you tie up with chains and more. You should ideally have several choker hooks in your arsenal. Slider choking hooks are commonly found in industries that move a lot of logs and other materials that require being tied up to lift and move.

Turnbuckles

Lastly, to help workers control the tension on a cable all while reducing excess cable slack, you’re going to need a turnbuckle. There are several variations of turnbuckles and we offer five: jaw and eye, jaw and jaw, hook and eye, hook and hook, and––you guessed it––eye and eye. Each turnbuckle has its own advantages, depending on your application. Like the majority of our other hardware, all our turnbuckles are also galvanized by forging.

Now that you have a basic understanding of the different types of rigging hardware and their uses, you can look for quality hardware. Galvanized and forged materials are certainly your best bet, especially if you need longevity.

Here at American Cable Rigging, we’ve been a family owned and operated business for over thirty years, and that’s exactly how we do business. Our family takes pride in providing our customers with high-quality products and being a one-stop-shop for all your cable rigging hardware needs. Contact us today for more information; we’re happy to help.