stainless steel cable railing fittings

How to Install Stainless Steel Cable Railings Easily

Over one million Americans fall and injure themselves on staircases every year. Cable railing can help mitigate some of these accidents while giving you a streamlined and modern appearance that can go with many different design schemes. While this might seem like a project you can’t tackle yourself, the good news is that installing stainless steel cable rail fittings and wire can be done on your own, and in less time than you think!

Select the Railings

Firstly, you need to decide the type of stainless steel cable railing you want to use. Railing sets can make this process easier and will come with stainless steel cable railing fittings, mounts, and everything else you’ll need to complete the project. These railings can be used to secure staircases, balconies, and anything else you need to be cordoned off for either safety or aesthetic reasons. Prior to beginning your project, it’s important to check with your local building codes to ensure there are no stipulations you need to keep in mind while installing your railing.

Designing and Building

Stainless steel cable railing fittings and wires need a frame in order to be installed. The frame you install will be dependant on your own style desires and the type of space you have. Frames can be constructed from wood, aluminum, and stainless steel, allowing you to decide the type of material that would be best for your project. It’s suggested that you place posts no more than 42” apart to ensure that everything stays tight and secure. If posts are set too far from each other wires can sag leading to lowered safety and poor aesthetics.

Installing the Cables

The basic tools you’ll need for installing the cables are cable cutters, a drill, pliers, and a wench. It will take good attention to detail when it comes to drilling the holes you’ll need for running the wires. To help ensure everything stays accurately lined up, tape measures and beam levels will be invaluable for keeping everything straight.

Before you set the wires you’ll need to decide how many rows you need. Keep in mind that cables should be placed no more than four inches apart. Within this in mind, measure out how many you can fit between your frame and work from there. Once you have this in mind, mark the points in the frame that will need to be drilled and double-check your work for accuracy, you don’t want to start installing stainless steel cable railing fittings only to discover one is a quarter of an inch higher than its second connecting point!

When you’re certain of your positioning, drill the holes and begin running the cables. If everything is properly lined up this part should be easy and quick.

Tighten the Cables and Trim as Needed

Once the cables have been run, the last step is tightening and trimming as needed. If you bought a kit, the included cable railing hardware should make this relatively easy. Using the stainless steel cable railing fittings, bolts, and mounts to carefully secure and tighten each wire until everything is even and tight. Once you’ve secured everything, trim off any excess using a pair of wire cutters.

Installing stainless steel cable railings is easier than you may think. If you need railing installed around your home, consider the benefits of tackling the project yourself. Wire railings are not only easy to install, but they are durable and can last for decades when fitted properly.

There’s nothing quite like the satisfaction of handling a project like this on your own. With the right tools and the proper railing kits, you can have your own sleek and modern railings installed in less time than you think.